HOME

CONTACT US

Programmable

Portable Chargers

On Board Chargers


60 Amp Chargers

100 amp chargers

Battery Fuel Gauge

Load Testers

Charger Controller

Charge Diverters

No Polarity Chargers

Octopus Charger

On Board Chargers

Parallel Charger

Portable Chargers

Replacement OEM Chargers 

Series Chargers

Aircraft APU & Charger

 

QUICKCHARGESTORE.COM

 

 

SELECT-A-CHARGE

PORTABLE PROGRAMMABLE     CHARGERS     

PDF Product Literature

PDF operating instructions


QP-24-36-48v/20A

SELECT-A-CHARGE

 

This model has maximum versatility. It has a 20 amp output with voltage selection and is ideal for golf carts, personnel carriers, floor scrubbers, pallet jacks, and other light material handling equipment. Great for rental use or all around shop charger.

PDF operating instructions


QSP-24-36-48v/50A

 SELECT-A-CHARGE

 

PDF operating instructions

 

All Industrial Applications.

One touch programming allows these chargers to charge deep cycle, wet starting, gel, and AGM batteries with precision. Also programmable is gassing mode, and recycle times when in shut off mode. The 2 digit LED display shows percent of charge in battery and battery voltage. Float voltage is temperature compensated. DC current limiting and polarity protection protect against overloads.

 

      3 YEAR WARRANTY.  Made in U.S.A.


  Programmable Charge Profiles:

F1 - Float: Battery voltage rises to 2.3 max before dropping into a low float of 2.26

F2 - Gas & timed shut off: Timer trips at 2.3 gassing threshold. Batteries are allowed to gas to a maximum of 2.55 volts per cell before shut off. Programmable recycle time. Best for deep cycle batteries

F3 - Gas & float: Timer trips at 2.3 gassing threshold. Batteries are allowed to gas to a maximum of 2.55 volts per cell before dropping into indefinite float of 2.26 volts per cell. Best for deep cycle batteries where an indefinite maintenance charge is desired.

F4 - AGM: Timer trips at 2.3 gassing threshold. Batteries are allowed to gas to a maximum of 2.4 volts per cell before dropping into indefinite float of 2.26 volts per cell. Best for AGM batteries.

       

This table applicable to single voltage

Select-A-Chargers only

 

 


Charges 30 amps at 48 volts, 40 amps at 36 volts, and 50 amps at 24 volts, all using 117 volts input. Also can be programmed for different battery types. This charger is perfect for the rental of occasional use forklifts were the operator does not have 230 volts available.

 

Your choice of DC connector, adapters available for different applications.

 

Dimensions H.W.D - 12" x 13" x 14"

Weight - 70 lbs.

AC - 117@60 Hz. 13-15 amps