![]() |
|
Select-A-Charge Portable Chargers Select-A-Charge On Board Chargers
Fuel Gauges & Volt Meters
|
ON BOARD CHARGERS
large - 25, 35, 40 amp
small - 5, 6, 10, 12, 15 amp
PDF (OBE) Operating Instructions |
Scissor Lifts, Floor Scrubbers, Engine Standby Generators, Railroads, Pallet Jacks, Electric Vehicles, RV's, Oil field, Mining #1 REPLACEMENT CHARGER, FITS ANYWHERE
Small And Compact: Fits Slim Scissors, mounts in any direction
Vibration Resistant: No moving parts, and an integral design
Rugged Construction: Totally enclosed to resist the effects of water, dirt, and a harsh environment. Pressure washer proof
Near bullet proof: Tough die cast enclosure
Energy Efficient: As much as 25% savings over ferroresonant chargers Made in U.S.A. Float (OBE): Regulates the battery voltage at 2.3 volts per cell @ 70 degrees F. Temperature compensating. Best for starting batteries, and gel's Gas & timed shut off (OBET): Timer trips at 2.3vpc, gassing threshold. Batteries are allowed to gas to a maximum of 2.55vpc before shut off. Best for deep cycle batteries Gas & float (OBAE): Timer trips at 2.3vpc, gassing threshold. Batteries are allowed to gas to a maximum of 2.55vpc before dropping into indefinite float of 2.26vpc. Best for deep cycle batteries that may see long periods of inactivity. AGM (OBAGM): Batteries bulk charge to 2.3vpc, and enter absorption cycle where voltage is allowed to climb to a maximum 2.45vpc before dropping into indefinite float of 2.26vpc.
|
|
Other volt/amp combinations available upon request.
Model OBAE24v/25ASJ Model OBAE24v/25AGN Skyjack P.N. 128537 Genie P.N. 96211 24 volt 25 amp replacements for SKYJACK and GENIE scissor lifts. Mounting plate matches OEM charger, no holes to drill. Includes drive lockout circuit.
|
All chargers come with 24" 3 prong AC cord, and 6'
color coded DC leads with 3/8 ring terminals
All models available in 230 volt 50 Hz. |